Packaged System:
- FALCO 600 Catalytic Oxidizer
- Regenerative Blower (20 HP, 3 Phase, Explosion Proof)
- FALCO Vapor Control Valve (VCV) with Filter
- Solberg 4” Inline Blower Filter
- Stainless Steel Vacuum and Pressure Gauges
- Vacuum Relief Valve
- Recirculation Valve For Flow Adjustment
- Mounting Frames, Factory Piping and Wiring Between FALCO, Blower, and VCV
Build America, Buy America (BABA) Compliant. Suitable for federally funded infrastructure & remediation projects.
This high flow vapor extraction and treatment system integrates the FALCO 600, SVE Blower, Vapor Control Valve (VCV), and inlet filter onto one stainless steel frame. Assembly weighs 2,270 lbs and is 56” wide, 78” long, and 87” tall. System is fully tested and can be economically shipped by common carrier (flat bed not required).
Resources:
Documents
- Cut Sheet – PDF
- Flow and Control – PDF
- Major Components (FALCO 600 with Regenerative Blower Package) – PDF
- Process and Instrumentation Diagram (P&ID) – DWG | PDF
- Vapor Control Valve (VCV) Installation Manual – PDF
- Vapor Control Valve (VCV) 3D View – PDF
- FALCO 600 Catalytic Oxidizer with Regenerative Blower Package Site Plan – PDF
- FALCO 600 Catalyst Replacement Procedure – PDF
Calcuators
- FALCO 600 Energy Use Calculator
- FALCO 600 Flow Rate & Inlet Pressure Calculator
- Pounds / Kilograms Per Day Hydrocarbons Treated Calculator
Additional Resources
This high flow vapor extraction and treatment system integrates the FALCO 600, SVE Blower, Vapor Control Valve (VCV), and inlet filter onto one stainless steel frame. Assembly weighs 2,270 lbs and is 56” wide, 78” long, and 87” tall. System is fully tested and can be economically shipped by common carrier (flat bed not required).
At low vacuum, up to 370 lbs/day of petroleum hydrocarbons can be treated. Small size, high processing capacity, and energy efficiency make this system ideal for large scale Soil Vapor Extraction applications.
Specifications:
| • | FALCO 600 Catalytic Oxidizer |
| • | FPZ regenerative blower model # SCL K12-MS-GOR-C-1070-XP with 20hp, 3 phase XP motor |
| When integrated with the FALCO 600, this 20 hp blower provides the following performance: | |
| 60” H20 vacuum = 510 scfm oxidizer flow | |
| 50” H20 vacuum = 550 scfm oxidizer flow | |
| 40” H20 vacuum = 600 scfm oxidizer flow | |
| • | Vapor Control Valve (VCV) with filter |
| • | Solberg 4″ inline blower filter |
| • | Stainless steel vacuum and pressure gauges |
| • | Vacuum relief valve |
| • | Recirculation valve for flow adjustment |
| • | Mounting frames, factory piping and wiring between FALCO, blower and VCV |
