Call Now

FALCO 300 with 7.5 H.P. Blower Package

Packaged System:

  • FALCO 300 Catalytic Oxidizer
  • Regenerative Blower (7.5 HP, 3 Phase, Explosion Proof)
  • FALCO Vapor Control Valve (VCV) with Filter
  • Solberg 3″ Inline Blower Filter
  • Stainless Steel Vacuum and Pressure Gauges
  • Vacuum Relief Valve
  • 15 HP Variable Frequency Drive
  • Mounting Frames, Factory Piping and Wiring Between FALCO, VFD, Blower, and VCV
  • Stainless Steel Mounting Rails with Fork Lift Pockets



  • Cut Sheet – PDF
  • Flow and Control – PDF
  • Major Components (FALCO 300 with Regenerative Blower Package) – PDF
  • Major Components (FALCO 300 with VFD Controlled 7.5HP Blower Package) – PDF
  • Process and Instrumentation Diagram (P&ID) – DWG | PDF
  • Vapor Control Valve (VCV) Installation Manual – PDF
  • Vapor Control Valve (VCV) 3D View – PDF
  • FALCO 300 Catalytic Oxidizer with Regenerative Blower Package Site Plan – PDF
  • FALCO 300 Catalyst Replacement Procedure – PDF


Additional Resources


The blower package combines with the FALCO 300 to form an integrated vapor extraction and treatment system.

This package can be installed on either single phase or 3-phase sites.  A Variable Frequency Drive (VFD) converts single-phase input voltage to a 3-phase output to operate the extraction blower.  The VFD is also used for flow adjustment.  Factory assembly minimizes work on site.

Components are mounted on frames joined by forklift beams.  One frame supports the blower, Vapor Control Valve, and accessories.  The second frame supports the FALCO 300 and VFD. This low-profile system weighs 1525 lb. and is 4’ wide, 5’7” long, and 6’2” tall. It fits in a parking space or a full size pickup truck.

System is fully wired and tested at Falmouth Products for maximum reliability and continuous outdoor operation.


There are no reviews yet.

Be the first to review “FALCO 300 with 7.5 H.P. Blower Package”

Your email address will not be published. Required fields are marked *


FALCO 300 Catalytic Oxidizer
FPZ 7.5 hp, three phase, explosion proof, inverter-duty, regenerative blower model #SCL K07-MS-7.5-3 XP-1
When integrated with the FALCO 300, this 7.5 hp blower provides the following performance:
25” H20 vacuum = 250 scfm oxidizer flow
40” H20 vacuum = 223 scfm oxidizer flow
60” H20 vacuum = 190 scfm oxidizer flow
FALCO Vapor Control Valve (VCV) with filter
Solberg 3″ inline blower filter
Stainless steel vacuum and pressure gauges
Vacuum relief valve
Schneider Electric 15 HP Variable Frequency Drive in NEMA 3R enclosure for phase conversion and flow adjustment
Stainless steel mounting rails with forklift pockets
Mounting frames, factory piping and wiring between FALCO, VFD, blower and VCV