FALCO 600 Catalytic Oxidizer Flowrate/Inlet Pressure Calculator

* FALCO 600 is normally operated with heat exchanger bypass closed at concentrations < 800 ppmv.
FALCO 600 may be operated with heat exchanger bypass open at high concentrations.

Flow > 700 scfm or < 300 scfm is beyond the normal operating range. Inlet pressure assumes a clean flame arrestor.

Catalyst volume of the FALCO 600 = 4.9 ft3
Space velocity (GHSV) = Hourly volumetric feed gas flow rate per reaction volume

		rev 5-7-20

		This calculator provides an estimate of flow through a FALCO 600 at a catalyst temperature of 330°C with the heat exchanger bypass valve closed.*
		Alternatively, if the Flow Rate is known, Inlet Pressure can be estimated. Catalyst Residence Time and Space Velocity may also be calculated.


		Known Inlet Pressure:
		Enter Inlet Pressure		(in H2O
		Estimated Flow Rate =		(SCFM)


		Known Flow Rate:
		Enter Flow Rate		(SCFM)
		Estimated Inlet Pressure =		(in H2O)
		Space Velocity (GHSV)=
		Catalyst Residence Time =

		Note: On units manufactured before 2013, opening the heat exchanger bypass valve will reduce pressure drop by approximately 4-6 in H2O

FALCO 600 Flowrate and Inlet Pressure Calculator (SVE)

Submit calculator form data to Falmouth Products for review.

Contact Us

Get In Touch

Falmouth Products

Falmouth Products equipment is available for purchase and Rental. Used Catalytic Oxidizers (Catox's) are also available. Our engineering team is always available to discuss your specific application.

Falmouth Products is a division of Product Recovery Management, Inc. All rights reserved.

Quick Links